Refill
Fill each tank with your preferred body wash or shampoo.
Ready-to-use foam
Bubble Blast delivers ready-to-use foam, so you can skip working up a lather by hand.
Fill both tanks, keep your essentials ready, and dispense foam with one press.
Fill each tank with your preferred body wash or shampoo.
Keep two shower essentials loaded and ready.
Press the corresponding button to dispense foam.



Three real routines
The same simple control moves from an everyday shower to longer wash routines and pet bath time.
The fine-bubble hand shower

Use the selector on the hand shower when you want the fine-bubble rinse. Bubble Blast remains off.

A dense cloud of fine bubbles scatters light through the water, making the effect visible as it fills a clear vessel.

A macro comparison shows the intended bubble scale beside ordinary aerated water. Final performance will be published with prototype test data.



Watch it work
Move through the setup, output and foam texture at your own pace. Videos only play when you choose.
Early tester feedback
Having the foam ready meant I could move straight into washing, without reaching for a bottle and working up a lather first. The part I noticed most was having fewer things to handle.
My hair is long, so washing it often means switching between reaching for the bottle, working up a lather, and spreading it through my hair. Being able to spray foam directly onto wet hair means less reaching and lathering. It makes the whole routine feel easier.
My dog moves around during bath time, so keeping one hand available matters. Being able to apply foam while keeping him steady was the part I appreciated most.
The setup was simpler than I expected. I followed the steps and was ready to use it. I appreciated not having to deal with a complicated setup.
The two-tank design caught my attention. I like having things prepared before I step into the shower, rather than gathering bottles halfway through. Clear instructions on filling and cleaning the tanks would help me make it part of my routine.
The foam felt fine and silky on my skin and spread smoothly. That soft feeling made the whole shower feel really comfortable.
Installation Guide
Mount the bracket, attach the unit, connect the hoses, then fill the tanks.
Good to Know
Practical answers about refills, water pressure, charging, cleaning, shipping and warranty.
No special or proprietary refills are required. You can use your own body wash or shampoo—there is no required bundled purchase. Because formulas vary, foam output and feel may differ from one product to another.
Bubble Blast can work with lower water pressure, depending on how low it is. Extremely low pressure may not provide enough water flow for normal operation. If you’re unsure whether your shower setup is suitable, please contact our support team before ordering—we’ll help you check.
With typical use, a full charge lasts about one month. Battery power is consumed only in foam mode; water-only mode does not use the battery. Actual runtime varies by use.
The built-in program automatically flushes the internal tubing after each use, so you don’t need to worry about cleanser remaining in the tubes.
Bubble Blast dispenses approximately 30 ml per minute. A typical shower uses about 7–8 ml of body wash or shampoo, which is roughly 15 seconds of foam dispensing. Actual usage depends on how long you use foam mode.
Yes. Water-only mode continues to work even when the battery is empty. A charging reminder alerts you when the battery reaches 10%.
We ship to most regions worldwide. Destination availability will be confirmed on our Kickstarter campaign page.
Bubble Blast comes with a one-year warranty. If a quality-related defect causes a fault or stops your unit from working during this period, we’ll provide a free replacement.
Follow Bubble Blast from here.
Get the real build updates, Kickstarter timing, and first-run availability. No weekly noise.